Wegner J16 Rocking Chair

LACQUERED & PAINTED WOOD

Clean with a soft cloth tightly wrung out in clean water. Wipe the wood following the direction of the grain. For dirty surfaces, use a mild solution of soap flakes or a universal cleaning agent. Then polish with a soft, dry cloth. Never leave wet patches on lacquered wood surfaces as it can cause the lacquer to peel.

Read more about looking after lacquered and painted wood surfaces.

OIL TREATED WOOD

Oiled wood surfaces should be wiped with a soft dry cloth. Always wipe the wood following the direction of the grain. Never use water on untreated wood surfaces if it can be avoided. If necessary, always use a soft cloth tightly wrung out in clean water. If additional cleaning is required, use a mild soap flake solution or a cleaning agent for oiled wood surfaces. The wood will then need to be re-oiled later to prevent the wood from drying out.

Read more about looking after oiled wood surfaces.

PAPER CORD

Gently vacuum-clean the paper cord to avoid wear from dust and dirt. Wet marks should be carefully removed with a soft cloth. 

SOAP TREATED & UNTREATED  WOOD

Wood surfaces should be wiped with a soft dry cloth, or a soft cloth tightly wrung out in clean water. Always wipe the wood following the direction of the grain. If you use a damp cloth, always wipe the entire surface to avoid marks. Then polish with a soft, dry cloth. Dirt and grease stains must be removed with a soft cloth, tightly wrung out in a mild soap flake solution.